192.168.l.254 IP Address : Fix Wireless Router Troubleshoot

192.168.l.254 Sometimes logging in to your wireless router as a local host can be pretty irritating due to the connectivity error or some different problems. I have faced it several times & even your pre-set password of the last setup of your router doesn’t rescue from the problem. Well, to solve this issue, you don’t have to be a tech geek, a little knowledge about it can easily solve such problem. So I will recommend you to go through the article point to point.

There may be many reasons why you are not being able to login, may be you have miss-entered the IP address or there may an issue associated with the route. Even the hardware connectivity problem (with the wires or Ethernet cable) can be another reason for such login failure. Let’s find out some quick fixes for such issues.

 

credit: AddictiveTips

 

Trouble Finding the Login Page

• Hard-ware matters:  Make sure your all hardware devices have been connected properly and none of them has any issue. Many times we plug in the wires or cables in the wrong block, so don’t forget to double check it and yes loose connections also arise such problems, and so do connect them properly.
There might be blockage problems sometimes, so unplugging & re-plugging the whole system can solve the issue for you. Also make sure all the blinking lights of your router giving the desired output. Changing the block of the Ethernet can also be tried as one block may stop working. If you are using desktop, 70% of the time the issue aroused due to some Ethernet problems, as normally desktop uses 2 network cards, one connection is on the mother board and another one is on-board.

192.168.1.254: IP address

• Miss-Typed IP Address: Yes I can understand, entering such long number is a hard task, but do it properly. A wrong IP address will lead you to such login errors. Mainly there are two IP address that can help you to login, 192.168.0.1 and 192.168.1.1 , try them, surely one will work for you. Make sure you are not using ‘.com’. Just simply open your browser, select on the address bar & type the digits as they are and press ‘enter’. If you still have login problem, let’s go ahead and solve other issues.

• IP Configuration May Help: Go to your command prompt. (run->cmd). And run the IPCONFIG command. It will provide you your IP address. Sometimes the computer may choose some IP address suitable for it to connect with the router.

Also check : 192.168.l.254 Router Login

credit: 192.168.1.254

 

So don’t skip this step

Find the IP Address:

For windows users follow the steps:
1) Go to ‘Start’.
2) Click ‘Run’ or type in the search box.
3) Write ‘cmd’ and press ‘enter’.
4) Another new window will popup. Type ‘IPCONFIG’ and hit the ‘Enter’ button.
Windows 8 users, press ‘X’ holding the ‘windows key’ and follow the steps from number 3 mentioned above.
After getting the required IP address tray to change it in automatic or dynamic.

 

If you don’t remember password for you router you can try following default combinations which are used by router manufacturer as defaults.

D-Link routers

All D-Link routers use username: admin
D-Link DI-514 and DI-524, DI-804, DI-604, DI-704, use empty password.
All other D-Link routers use password: admin

MSI routers

username: admin

password: admin

ZTE routers/modems

username: admin

password: admin

or

username: ZXDSL

password: ZXDSL

 

Final Words: Above we have provided you some quick fixing steps you may try, hopefully one of them will surely click. If you are still having issues, please let us know commenting below, we will try to fix it for you!

192.168.1.254 Router Login

 

192.168.1.254 is a private IP address through which one can access many company’s routers and modems which are residing in the local network. You could access your router through this IP address192.168.1.254 Router Login, however, you would require the username and password to access its settings and configure it. You could consult your user manual that came with your router to know the username and password of your router, however, if you could not locate it then you could try below two default username and passwords to access it.

1: Username: admin

Password: admin

2: Username: root

Password: admin

 

 

However, in case you don’t know or remember your username and password, then you may follow below mentioned steps to access it.

 

  1. Open your browser and type in the IP Address – 192.168.1.254
  2. Remember that this IP address works only for IPv4 address not for IPv6 address.
  3. On this page, you can even reset your username and password. You need to search for factory defaults page which is usually under administration tab.
  4. There on factory default tab, you need to click on “restore factory settings“.

 

Second Method to restore factory settings is hard boot your router

 

  1. Turn off your router from the main switch.
  2. Now you need to press and hold the reset button of your router. You would require a pointed pin like prop to do this. Release the button after like ten seconds while you have again turned on your router.
  3. After you have released the button, you should wait for the device to reboot and try to see if the connection on computer is re-establishing.
  4. Now on the page which have opened with the default IP address –192.168.1.254 , try using default username and password both as ‘admin’. Also, you may search online for default username and password for your device by searching the terms like “Sparkline router default username and password”.
  5. Once you enter this page, you can setup new username and password for your router.
  6. Remember, all the information will be reset to factory settings while you have reset the router, hence you need to setup everything (all information) again.
  7. You must change three most important things one you have reset the router and logged into your IP address page that is change the default IP address of your router, change the default username and password of your router and change the default network name of your router. These will ensure that your router is safe from unwanted intrusion and hacking.
  8. To configure your router on this page, follow the below steps

 

  1. Click on advance section setup of your router.
  2. Here you need to tap on Service Provider name.
  3. As per your requirement, select one of the two that is bridge mode or PPPOE.
  4. Now save and reboot your router to make the changes effective.

 

Some of the brands whose routers use this IP address are 2Wire Routers, Billion Routers, Netopia Routers, Thomson Routers, GigaFast, Hawking, Intellinet, LevelOne, Linksys.

 

192.168.1.254 IP address

 

192.168.1.254 is a default IP address for some of the broadband routers and modems. That is this IP address cannot be access directly from internet and this block is reserved for private networks. Some of the common routers and modems which uses this IP address are Billion, 2Wore, SparkLAN, Westell modems etc.

While a router will have this IP address – 192.168.1.254 however it will assign a different IP address to another device linked to it to avoid any kind of IP address conflicts. In case you don’t know the IP address of your router, then you could locate it using a command prompt by following the simple steps below –

Press the window menu button and click the command prompt.
Enter – ipconfig,to display the list of connections on your computer.
Now find the default gateway under your local area connections section and now this is your router’s IP address.

In certain cases, 192.168.1.254 , this IP is also login for router’s control panel where you could change and alter various settings like your Wi-Fi channel, its password, and adjust the firewall settings and even QoS details of your router.

This IP address is only available for the routers which are in your local network, i.e. the router which is inside your network. Other than this IP address, router also have another IP address which is its public IP address which can be accessed from anywhere through a public IP.

In case your router is accessible through 192.168.1.254 IP address then you just need to simply open your browser and type this IP address and in the page, you open then, you need to enter the default username and password to access your router settings. You must consult your router manual to see what is the default username and password for your router.

In case you don’t remember the username and password for your router then you can try some of below combinations –

Username: admin
Password: admin

Username: root
Password: admin

2Wire
Username:  blank
Password:  blank

Aztech
Username: “admin”, “user”, or blank
Password: “admin”, “user”, “password”, or blank

Billion
Username: “admin” or “admim”
Password: “admin” or “password”

Motorola
Username:  “admin” or blank
Password: “password”, “motorola”, “admin”, “router”, or blank

Netopia
Username: “admin”
Password: “1234”, “admin”,” password” or blank

SparkLAN
Username:  blank
Password:  blank

Thomson
Username:  blank
Password: “admin” or “password”

Westell
Username:  “a192.168.1.254 is a default IP address for some of the broadband routers and modems. That is this IP address cannot be access directly from internet and this block is reserved for private networks. Some of the common routers and modems which uses this IP address are Billion, 2Wore, SparkLAN, Westell modems etc.

While a router will have this IP address – 192.168.1.254 however it will assign a different IP address to another device linked to it to avoid any kind of IP address conflicts. In case you don’t know the IP address of your router, then you could locate it using a command prompt by following the simple steps below –

Press the window menu button and click the command prompt.
Enter – ipconfig,to display the list of connections on your computer.
Now find the default gateway under your local area connections section and now this is your router’s IP address.

In certain cases, 192.168.1.254 , this IP is also login for router’s control panel where you could change and alter various settings like your Wi-Fi channel, its password, and adjust the firewall settings and even QoS details of your router.

This IP address is only available for the routers which are in your local network, i.e. the router which is inside your network. Other than this IP address, router also have another IP address which is its public IP address which can be accessed from anywhere through a public IP.

In case your router is accessible through 192.168.1.254 IP address then you just need to simply open your browser and type this IP address and in the page, you open then, you need to enter the default username and password to access your router settings. You must consult your router manual to see what is the default username and password for your router.

In case you don’t remember the username and password for your router then you can try some of below combinations –

Username: admin
Password: admin

Username: root
Password: admin

2Wire
Username:  blank
Password:  blank

Aztech
Username: “admin”, “user”, or blank
Password: “admin”, “user”, “password”, or blank

Billion
Username: “admin” or “admim”
Password: “admin” or “password”

Motorola
Username:  “admin” or blank
Password: “password”, “motorola”, “admin”, “router”, or blank

Netopia
Username: “admin”
Password: “1234”, “admin”,” password” or blank

SparkLAN
Username:  blank
Password:  blank

Thomson
Username:  blank
Password: “admin” or “password”

Westell
Username:  “admin” or blank
Password: “password”, “admin”, or blank

Once you have access to your router panel you can change several settings there including the IP address of your computer.

One can more easily change the IP address of its router. Try to consult its manual to know how it works, commonly you only need to login into your web control panel and navigate to the nearest LAN settings and voila you have access to change your LAN settings. Then you need to go your DHCP settings and insert the new address pool, the one which corresponds to your new router address.

dmin” or blank
Password: “password”, “admin”, or blank

Once you have access to your router panel you can change several settings there including the IP address of your computer.

One can more easily change the IP address of its router. Try to consult its manual to know how it works, commonly you only need to login into your web control panel and navigate to the nearest LAN settings and voila you have access to change your LAN settings. Then you need to go your DHCP settings and insert the new address pool, the one which corresponds to your new router address.